The IDView Point to Point Wireless Bridges are an excellent way connecting network devices that are hard to run wires or when trenching is needed.
Using these wireless bridges, the devices can now communicate from up to 2km away line of sight. These PtP devices are not limited to security products but are also used on the networking IT side as well. Linking two different sites together to share one internet connection
| Hardware Specification | Qualcomm Atheros AR9344 560MHz CPU; |
| DDR: 64MB; Flash: 8MB; Power Amplifer Chipset: SKY85728-11; | |
| Antenna | Built-in 2*14dBi Antenna |
| RF Parameters | Output Power (Max): 500mW (27dBm); Receiving Sensitivity (Max): -96dBm; Frequency:802.11a/n :5.180GHz-5.825GHz |
| Modulation Mode | DSSS : DBPSK@1Mbps 、 DQPSK@2Mbps 、 [email protected]/11Mbps; |
| OFDM : BPSK@6/9Mbps、QPSK@12/18Mbps、16-QAM@24Mbps、64-QAM@48/54Mbps; | |
| MIMO-OFDM : MCS 0-15 | |
| Wireless Rate | 5.8GHz: 300Mbps |
| Physical Ports | 1* 10/100Mbps WAN RJ45 Ethernet Port; 1* 10/100Mbps LAN RJ45 Ethernet Port; 1* POE Output Slide Switch; |
| 1* RESET Button | |
| Indicator | 8* Indicators:Power/WAN/LAN/WiFi/Signal Strength(1-4) |
| Power | Power Supply: Support 802.3af/802.3at; |
| Power Adapter: 48V POE Power Adapter | |
| Power Consumption(Max) | <8W |
| IP Index | 2KV Lightning Protection; IP63 |
| MTBF | >250000H |
| Installation Way | Wall-mounted/Pole-mounted |
| Case | Plastic Case (Imported ABS Material) |
| Physical Features | Size: 262*80*53mm; Weight: 0.32Kg |
| Working Environment | Working Temperature: -40 C~55 C; Storage Temperature: -50 C~75 C; |
| Working Humidity: 10%~90%RH Non-condensing; Storage Humidity: 5%~90%RH |
Only logged in customers who have purchased this product may leave a review.
Datasheet of IV-WAP-CF
Reviews
There are no reviews yet.